Sable V6-3.0L DOHC VIN S (2002)
Headlamp Bulb: Service and Repair
REMOVAL
WARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS
SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB ONLY BY ITS BASE. GRASP THE BULB ONLY BY ITS BASE.
AVOID TOUCHING THE GLASS ENVELOPE.
NOTE: The headlamp bulb should not be removed from the headlamp until just before the new bulb is installed. Removing the bulb for an extended
period of time may affect headlamp performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on
the headlamps with the bulb removed.
1. Remove the headlamp assembly.
2. Disconnect the electrical harness from the headlamp bulb cover
3. Rotate the headlamp bulb cover counterclockwise and remove the cover.
4. Disconnect the headlamp bulb electrical connector.