Sable V6-3.0L DOHC VIN S (2002)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
1. Remove the lower intake manifold.
2. Remove the harness retaining nut.
3. Unclip and disconnect the LH Heated Oxygen Sensor (HO2S) electrical connector.
4. Disconnect the two coolant temperature sensor electrical connectors.