Sable V6-3.0L DOHC VIN S (2002)
8. Remove the safety belt guide.
1
Remove the pin-type retainer.
2
Rotate the safety belt guide out from the bottom.
3
Pull out and remove the safety belt guide.
9. Remove the safety belt retractor.
1
Using special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
^
Refer to the removal procedure or Specifications for torque specifications.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
^
If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
2. Check the restraint system for correct operation.