mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seat Belt Retractor|Service and Repair > < Restraints - Seat Belts Slow to Retract|Page 7401
Page 1
background image

Seat Belt Retractor: Description and Operation

WARNING:  REAR-FACING INFANT SEATS SHOULD NEVER BE PLACED IN THE FRONT SEATS.

The dual locking mode retractor on the shoulder belt portion of the combination lap/shoulder safety belt for the front outboard passenger, and all four
door rear and wagon rear outboard seating positions, operates in two ways.

1. In the vehicle-sensitive (emergency locking) mode, the shoulder belt retractor will allow the occupant freedom of movement, locking tight only on

hard braking, hard cornering or impacts of approximately 8 km/h (5 mph) or more. The front and rear outboard seat belt retractors can also be
made to lock by pulling/jerking on the belt.

2. In the automatic locking mode, the shoulder belt retractor will be automatically locked and remain locked when the combination lap/shoulder

safety belt is buckled and does not allow the occupant freedom of movement. This mode provides tight lap/shoulder belt fit on the occupant and on
a child safety seat.

3. When the combination lap/shoulder belt is unbuckled and allowed to retract completely, the retractor will switch to the vehicle sensitive

(emergency) locking mode.

The automatic locking mode must be used when installing a child safety seat in the front outboard passenger seating position, all four door rear seating
positions and wagon second row outboard seating positions.

Seat Belt Retractor|Service and Repair > < Restraints - Seat Belts Slow to Retract|Page 7401