Sable V6-3.0L DOHC VIN S (2002)
Steering Gear: Service and Repair
Removal and Installation
Steering Gear
Special Tools
Special Tool(s)
Note: New Teflon seals must be installed any time the lines are disconnected from the steering gear.
Removal
All Vehicles
1. Turn the steering wheel 1/4 turn and turn the ignition switch to the OFF position.
2. Remove both front wheel and tire assemblies.
3. Loosen the tie-rod end jam nuts.
4. Remove and discard the cotter pins and nuts.
5. CAUTION: Do not damage the tie rod end boot when installing the special tool.