Sable V6-3.0L DOHC VIN S (2002)
4. NOTE: It is not necessary to remove the stabilizer bar links from the stabilizer bar.
Remove the stabilizer bar, if so equipped. Remove the jack stands after the stabilizer bar is removed.
5. Remove the bolt and detach the rear wheel brake hose.
6. Remove the nut, washer and bushing. Detach the tension strut from the spindle.
^
Discard the nut.
7. CAUTION: Care should be taken when removing the strut and spring assembly so the rear wheel brake hose is not stretched.
Remove and discard the pinch bolt. Detach the spindle from the strut and spring assembly.
^
To aid in removal, use a large screwdriver to spread the pinch joint.
8. Partially lower the vehicle.