Sable V6-3.0L DOHC VIN S (2002)
2. Remove and discard the wheel hub grease seal.
3. CAUTION: Discard the rear wheel hub retainer. It is a torque prevailing design and cannot be reused.
CAUTION: Use care not to damage the rear brake anti-lock sensor when removing or installing the wheel hub.
Remove and discard the wheel hub retainer. Remove the wheel hub.
4. NOTE: Thoroughly clean any grease from the surrounding surfaces. If a new hub assembly is being installed, remove the protective coating using
carburetor degreaser.
To install, reverse the removal procedure.
^
Use a new wheel hub retainer and a new wheel hub grease seal.
