Sable V6-3.0L DOHC VIN S (2002)
Windshield: Vehicle Damage Warnings
CAUTION:
^
When installing urethane installed glass parts, the vehicle must not be driven until the urethane has cured. At temperatures above 21°C (70°F) and
relative humidities above 50%, adequate cure time is typically 24 hours. (Refer to the Essex drive away chart for the cure times as the
temperatures and humidity vary). Inadequate or incorrect curing can adversely affect the retention of the windshield.
^
Wipe off the Urethane Glass Prep Essex U-401 meeting Ford specification WSB-M5B314-B immediately after each application because it flash
dries.
^
If vehicle is to driven within 24 hours of urethane application, Urethane Adhesive Essex U-216 meeting Ford specification WSB-M2G316-B must
be used due to its one-hour cure time.