Sable V6-3.0L VIN 2 Flex Fuel (2005)
Tail Lamp: Service and Repair
REAR LAMP ASSEMBLY
Removal and Installation
1. Remove the luggage compartment scuff plate.
2. Pull back the luggage compartment carpet.
3. Disconnect the rear lamp assembly electrical connector.
4. Remove the nuts.
5. Remove the rear lamp assembly.
1
Pull the lamp assembly away from the body.
2
Disconnect the rear lamp assembly bulb connectors.
3
Remove the rear lamp assembly.
6. CAUTION: To prevent water from entering the luggage compartment, make sure the rubber grommet is fully seated.
To install, reverse the removal procedure.
