Sable V6-3.0L VIN 2 Flex Fuel (2005)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
IGNITION LOCK CYLINDER - FUNCTIONAL
REMOVAL
1. Disconnect the battery ground cable and wait at least one minute.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
While pressing in the ignition switch lock cylinder release pin, pull the lock. cylinder out of the steering column.
INSTALLATION
1. To install, reverse the removal procedure.
-
Verify the ignition switch lock cylinder operation.