mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Brakes and Traction Control > < Electronic Brake Control Module|Specifications|Page 6138

Sable V6-3.0L VIN U (1999)

Page 2
background image

7. Connect connector to antilock brake control module. Tighten connector retaining bolt to 4.8 Nm (42 inch lbs.).
8. Install mounting bracket and battery tray. 
9. Install battery and connect cables.

10. Bleed anti-lock brake control module. 

Sensors and Switches - Brakes and Traction Control > < Electronic Brake Control Module|Specifications|Page 6138