Sable V6-3.0L VIN U (1999)
Parking Brake Release Switch: Service and Repair
Removal
1. Disconnect release cable from parking brake control release arm and remove release cable grommet from parking brake control.
2. From under instrument panel, use a screwdriver to pry off and remove retainer clip securing cable and parking brake release handle to instrument
panel. Pull parking brake release handle and cable assembly out of instrument panel.
Installation
1. Start cable and parking brake release handle assembly through locating hole in instrument panel and install retainer clip that secures parking brake
release handle to instrument panel.
2. Connect release cable to parking brake control release arm and install release cable grommet to parking brake control.
