Sable V6-3.0L VIN U (1999)
Lamp Out Module: Service and Repair
REMOVAL
1. Open luggage compartment door.
2. Pull RH luggage compartment trim panel out towards center of vehicle to reveal lamp out warning module in RH rear inner fender.
3. Remove two screws retaining lamp out warning module to body.
4. Disconnect harness connector from lamp out warning module and remove warning module from vehicle.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 1.6-2.2 N.m (15-19 Lb-In).
