Sable AWD V6-3.5L (2008)
![background image](/mercury/sable_awd/v6-3.5l/Page-2149001.png)
Power Trunk / Liftgate Control Module: Service and Repair
POWER LIFTGATE MODULE
Removal and Installation
1. Remove the LH rear quarter trim panel.
2. Remove the power liftgate module.
-
Disconnect the electrical connectors and remove the power liftgate module retaining bolt.
-
To install, tighten to 9 Nm (80 lb-in).
3. To install, reverse the removal procedure.