Sable AWD V6-3.5L (2008)
Bench Seat Cushion (Part 2)
Removal and Installation
1. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.
2. Roll the backrest trim cover up, remove the 4 backrest latch-to-backrest frame bolts and remove the backrest frame.
-
To install, tighten to 50 Nm (37 lb-ft).
3. To install, reverse the removal procedure.
50 Percent
SEAT BACKREST - THIRD ROW, 50 PERCENT
Exploded View