Sable AWD V6-3.5L (2008)
Taurus And Sable Rear Seat Backrest, Second Row, 40 Percent
Removal and Installation
1. Remove the rear seat cushion.
2. Remove the 40 percent rear seat backrest.
3. Push in on the head restraint adjust button and remove the head restraint assembly.
4. Release the J-clip at the bottom of the backrest trim cover and release the trim cover hook-and-loop strips at the back.
5. Remove the bushing.
6. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip. The hook-and-loop strip may be torn
from the seat backrest foam.