Sable AWD V6-3.5L (2008)
Taurus And Sable Rear Seat Backrest, Second Row, 40 Percent
Removal and Installation
1. Remove the rear seat cushion.
2. Remove the 60 percent rear seat backrest.
3. Push in on the head restraint adjust button and remove the head restraint assembly.
4. Remove the screw and the armrest bracket outboard cover.
5. Remove the armrest-to-bracket bolt.
-
To install, tighten to 23 Nm (17 lb-ft).
6. Slide the pin, on the inboard side of the armrest, out of the backrest and remove the armrest.
7. Fold the armrest pocket panel of the trim cover up and move aside.
