Sable AWD V6-3.5L (2008)
Part 2
NOTE: LH 50 percent shown, RH similar.
1. Remove the third row 50/50 seat.
2. Remove the third row 50/50 backrest.
3. Pull to release and remove the backrest latch outer cover.
-
Pull the release strap through the recliner outer cover.
4. NOTE: If damaged when removed, install new rivets.
Remove the 2 rivets and pull the pivot release handle out of the pocket.
-
Using an appropriate tool, from under the rivet head, pry the rivet up.
-
When removing the rivet, make sure not to get under the insert or the rivet will not come out.
-
Another method that can be used to remove the plastic rivets is to drive a screw partially into the rivet head and pull the screw and rivet head
out. This will require new plastic rivets be installed.