Sable AWD V6-3.5L (2008)
![background image](/mercury/sable_awd/v6-3.5l/Page-563062.png)
58. Using a new gasket, install the upper intake manifold and the 6 bolts.
^
Tighten in the sequence shown to 10 Nm (89 lb-in).
59. Install the fuel tube bracket bolt to the upper intake manifold and install the wiring harness pin-type retainer.
^
Tighten to 6 Nm (53 lb-in).
60. Install the upper intake manifold short support bracket and the bolt.