Sable AWD V6-3.5L (2008)
![background image](/mercury/sable_awd/v6-3.5l/Page-203002.png)
Sedan
Removal and Installation
Wagon
1. Remove the 2 screws and the steering wheel controls bezel.
2. Remove the 2 screws and the speed control switch.
-
Disconnect the electrical connector.
-
To install, tighten to 7 Nm (62 lb-in).
Sedan
3. Remove the driver air bag module.
4. Remove the 2 screws and the speed control switch.
-
Disconnect the electrical connector.
-
To install, tighten to 7 Nm (62 lb-in).
All vehicles
5. To install, reverse the removal procedure.