Sable AWD V6-3.5L (2008)
3. Position the surface gauge on the same flat, level surface and adjust the gauge's arm until the scriber point is located on the lowest and furthest
outboard point of the lower ball joint.
^
Lock the surface gauge in this position.
4. With the surface gauge positioned on a flat, level surface, record the measurement of the surface gauge position (measurement B).
5. Subtract measurement from measurement B to obtain the front ride height (C).
^
Refer to Specifications.
Rear Ride Height Measurement
All Wheel Drive (AWD)
All Wheel Drive (AWD)