Sable AWD V6-3.5L (2008)
Steering Column Lock: Removal and Replacement
Steering Column Lock Module
Removal and Installation
CAUTION: Do not remove the ignition lock cylinder and the ignition switch at the same time or damage to the column may result.
1. Remove the ignition switch.
2. NOTE: Clean all metal shavings and foreign material after cutting slots in the steering column lock module bolts.
Cut slots into the heads of the 2 steering column lock module bolts.
3. Remove the 2 steering column lock module bolts.
^
Discard the bolts.
4. Remove the steering column lock module clamp.
5. Remove the steering column lock module.
6. To install, reverse the removal procedure.
^
Align the ribs on the steering column lock module with the window of the steering column tube.
^
Align the locating pin with the slot on the locating bracket of the steering column.
^
Tighten the bolts until the heads of the bolts shear off.