Sable AWD V6-3.5L (2008)
^
Tighten to 9 Nm (80 lb-in).
2. Inspect the transmission fluid cooler tube backing rings and seals for damage and install new backing rings or seals, if necessary. Lubricate the
transmission fluid cooler tube seals with clean transmission fluid and install the backing rings and seals on the transmission fluid cooler tubes.
3. Position the 2 transmission fluid cooler tubes on the transaxle and tighten the 2 transmission fluid cooler tube fittings.
^
Tighten to 25 Nm (18 lb-ft).
4. Install 2 new transmission fluid cooler tube bolts.
^
Tighten to 9 Nm (80 lb-in).