mercury Workshop Repair Guides

Mercury Sable AWD V6-35L Workshop Service and Repair Manuals

Turbine Shaft Speed (TSS) Sensor|Page 4090 > < Turbine Shaft Speed (TSS) Sensor|Page 4088
Page 4
background image

12. Remove and discard the transmission fluid cooler tube bolt and remove the transmission fluid cooler tube.

13. Inspect the transaxle case to make sure that the transmission fluid cooler tube seal and backing ring were removed with the transmission fluid

cooler tube and are not stuck in the transaxle case. If the transmission fluid cooler tube seal or backing ring are stuck in the transaxle case, remove
the seal and backing ring.

14. Disconnect the transaxle electrical connector and remove the wiring harness fastener from the main control cover stud.

Turbine Shaft Speed (TSS) Sensor|Page 4090 > < Turbine Shaft Speed (TSS) Sensor|Page 4088