Sable AWD V6-3.5L (2008)
26. CAUTION: Make sure that the park pawl actuator rod does not become disengaged from the park pawl and the abutment, or transaxle
removal and disassembly is required to reinstall the actuator rod.
Remove the TR sensor.
1
Slide the TR sensor down until the manual shaft is out of the transaxle case.
2
Rotate the TR sensor detent plate counterclockwise, as viewed from below until the plate rests against the transaxle case, remove the park pawl
actuating rod from the TR sensor and remove the TR sensor.
Installation
1. Install the TR sensor.
1
Position the park pawl actuating rod in the TR sensor.
2
Install the TR sensor in the transaxle case.