Topaz L4-140 2.3L HSC (1984)
Canister Purge Solenoid: Customer Interest
EVAP System - Stalling/Hesitation
Article No. 84-12-20
STALLS - COLD, WARM ENGINE/ HESITATION - COLD ENGINE DRIVEAWAY (2.3L HSC)
FORD 1984 TEMPO
LINCOLN-MERCURY 1984 TOPAZ
CALIBRATIONS: All
The above drive concerns may be caused by a vacuum leak in the canister purge port hoses at the rear of the carburetor.
Figure 30 - Lower Rear of Carburetor
1.
Check for missing rubber plug at end of vacuum hose to carbon canister purge ports - lower rear of carburetor (Figure 30).
2.
If plug is missing install rubber vacuum cap, part no. 382444-S, with a few drops of adhesive, part no. D7AZ-19554-C as shown.
3.
If original plug is intact, proceed with normal diagnostic procedures.
PART NUMBER
PART NAME
CLASS
382444-S
Cap - Vacuum
BS
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP12226A84
TIME:
0.3 Hr. DLR. CODING: Basic Part No. 12226 - Code: N8