Topaz L4-140 2.3L HSC (1984)
^
the program coverage and guidelines have been reviewed and understood by the customer.
^
the customer understands how to interpret the symptoms associated with an input shaft seal leak.
^
the customer is unwilling to accept the dealers confirming position that gear replacement is not required at this time.
^
the customer understands the inspection will be performed at no charge and that the inspection is being performed on a one-time only goodwill basis.
Inspection Procedure
^
With car on ground open door and cover seat.
^
remove steering column tube boot.
^
inspect for input shaft seal leakage.
^
install steering column tube boot.
^
remove seat cover.
Claiming Procedure
NOTE:
Ensure the conditions outlined above in "Administration of one-time inspection allowance" have been compiled with.
^
Claims for this Goodwill One-Time Inspection are to be submitted on a 6125-2 through DWE. Dealers without DWE must MAIL the claim into
Warranty Claims Processing at Oakville.
^
Claims MUST be dated and signed by both the Customer and Dealer Service Manager.
Claims MUST include the following:
Causal Part NO.
3D526
Condition Code.
775
Labor allowance.
0.4 Hours.
We feel this action will assist dealers in our mutual desire to support customer satisfaction.