Topaz V6-182 3.0L (1992)
7.
Apply the two (2) shorter pieces to the backside of the ornament. One (1) on each side and next to the longer pieces. Trim any excess tape that
hangs over the edge of the ornament.
NOTE:
THE ORNAMENT ONLY GOES ONE WAY. CHECK BEFORE REMOVING THE PROTECTIVE COATING.
8.
Remove the protective coating from the tape.
a.
Press the ornament firmly to the light bar with hand pressure.
b.
Hold in place for about one (1) minute.
PART NUMBER
PART NAME
CLASS
F26Y-13A246-A
Ornament - Light Bar
B
Obtain Locally
3M Scotch Mount Tape (3M
# 06377)
Obtain Locally
3M Wax And Grease Remover
(3M #08984)
OTHER APPLICABLE ARTICLES:
NONE
WARRANTY STATUS:
Eligible Under Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION
TIME
921301A
Replace Original Ornament
0.4 Hr.
921301B
Install New Ornament
0.3 Hr.
DEALER CODING
BASIC PART NO.
CONDITION CODE
13A246
03
OASIS CODES:
108000