Topaz V6-182 3.0L (1992)
10.
Install brake drum.
11.
Install tire and wheel assembly.
12.
If any hydraulic connections have been opened, perform system brake bleeding procedures.
13.
Adjust parking brake. Refer to individual car chapters for procedure.
14.
Inspect all hydraulic lines and connection for leakage, and repair as necessary.
15.
Check master cylinder fluid level and replenish as necessary.
16.
Check brake pedal for proper feel and return.
17.
Lower vehicle and road test. Do not severely apply brakes immediately after installation of new brake linings or permanent damage may
occur to linings, and/or brake drums may become scored. Brakes must be used moderately during first several hundred miles of operation
to ensure proper burnishing of linings.