Topaz V6-182 3.0L (1992)
Radiator Cooling Fan Control Module: Service and Repair
REMOVAL
1.
Disconnect the negative battery cable.
2.
Locate Integrated Relay Control Module (IRCM) on the left hand strut tower and disconnect electrical harness connector.
3.
Remove the module attaching screws from the bracket and remove the IRCM.
INSTALLATION
1.
Install the IRCM screws and tighten to 24-35 in lb (3-4 Nm).
2.
Connect the electrical harness to the IRCM.
3.
Connect the negative battery cable.