Topaz V6-182 3.0L (1992)
Evaporator Core: Customer Interest
Dash Panel Area - Rattling Noise
Article No.
94-13-8
06/29/94
^
AIR CONDITIONING - EVAPORATOR CORE - MOVES INSIDE CASE AND CREATES "RATTLING" NOISE
^
NOISE - "RATTLE" IN DASH PANEL AREA - EVAPORATOR CORE CASE
FORD:
1988-94 TEMPO
LINCOLN-MERCURY:
1988-94 TOPAZ
This article is being republished in its entirety to include the 1994 models.
ISSUE:
A rattling noise may come from the dash panel area, which can be isolated to the air conditioning evaporator case. Variations between the evaporator
core and the evaporator case may allow movement of the core inside the case.
ACTION:
Fabricate two (2) foam rubber seals, using closed cell foam rubber. Install these seals between the evaporator core and the evaporator case. Refer to the
following procedure for service details.
1.
Remove the blower motor and wheel assembly from the evaporator case. Refer to the appropriate year Tempo/Topaz Service Manual, Section
12-03A, for the removal procedure.
2.
Wedge a strip of closed cell foam rubber, 1/2 X 1/2 X 1-1/2" (12.7 X 12.7 X 38. 1 mm), between the evaporator core and the evaporator case wall.
Install at two places at the seam between the case halves as shown in Figure 1.
3.
Press the foam rubber firmly into the space to secure it.
4.
Install the blower motor and wheel assembly.
5.
Check the blower motor operation.
PART NUMBER
PART NAME
CLASS
Obtain Locally
Closed Cell Foam Rubber
-