Topaz V6-182 3.0L (1992)
7. Pull the white submersible connector apart and examine the wiring harness end of the connector (not the sensor end). Identify Circuits 619
(PK/W), 620 (P/LB), 611 (W/O) and 614 (GY/O).
8. Using a 152 mm (6 inch) length of bared wire, short the 619 (PK/W) wire to ground. Again, making sure there are no occupants in the vehicle,
short the 611 (W/O) and 614 (GY/O) circuits together with a second bared wire. The air bag should deploy. If the air bag does not deploy, go to
Procedure 2.
9. If successful, a loud report will be heard and the bag material will be visible in the center of the steering wheel. Allow at least 10 minutes before
approaching the air bag to allow for cooling.
The air bag is now inoperative and the vehicle may be scrapped in accordance with scrap metal procedures.