Topaz V6-182 3.0L (1992)
![background image](/mercury/topaz/v6-182_3.0l/Page-1033002.png)
Dial Indicator And Bracket Assembly
4. Mount Dial Indicator and Bracket Assembly and position stylus through hole in gauge disc. Ensure stylus has contacted servo piston, then zero
indicator.
5. Back off gauge disc screw until piston movement stops, then read indicator. Amount of piston travel shown on indicator will determine rod length
to be installed.
Servo Rod Selection Chart
6. Select a new piston rod using the Servo Rod Selection Chart. Install piston rod and repeat steps 1 through 5 to verify amount of piston travel.