Tracer L4-110 1.8L DOHC (1995)
Drive Belt: Adjustments
ALTERNATOR/WATER PUMP BELT
Adjust the tension of the belt using either belt tension gauge 021-0028A, or equivalent, or deflection method.
1. Using belt tension gauge tool No. 021-0028A, or equivalent, position the gauge on the longest accessible span of the belt and use the following
specifications:
-
New Belt (no run time) -- adjust tension to 85.8-103.4 lbs. Run the engine for 10 minutes, then readjust belt tension.
-
Used Belt (more than 10 minutes of run time) -- adjust tension to 68.2-85.8 lbs.
2. If using the deflection method, use the following specifications:
-
New Belt (no run time) -- belt deflection measurement should be 0.31-0.35 inch.
-
Used Belt (more than 10 minutes of run time) -- belt deflection measurement should be 0.35-0.39 inch.
POWER STEERING & A/C COMPRESSOR BELT
Adjust the tension of the belt using either belt tension gauge 021-0028A, or equivalent, or deflection method.
1. Using belt tension gauge tool No. 021-0028A, or equivalent, position the gauge on the longest accessible span of the belt and use the following
specifications:
-
New Belt (no run time) -- adjust tension to 110-132 lbs. Run the engine for 10 minutes and readjust tension.
-
Used Belt (more than 10 minutes of run time) -- adjust tension to 95-110 lbs.
2. If using the deflection method, use the following specifications:
-
New Belt (no run time) -- belt deflection measurement should be 0.31-0.35 inch.
-
Used Belt (more than 10 minutes of run time) -- belt deflection measurement should be 0.35-0.39 inch.