Tracer L4-110 1.8L DOHC (1995)
8.
Remove the bearing housing by tapping lightly with a plastic hammer (Figure 5).
9.
Remove the bearing housing and idler gear (Figure 6).
10.
Install the replacement idler gear (F4CZ-7F475-A) and output gear as an assembly by lightly tapping with a plastic hammer.
11.
Install the bearing housing bolts and torque to 19-25 N-m (14-18 lb-ft).
12.
Align the groove on the idler shaft with the mark on the bearing housing and tap the roll pin in with a punch.
13.
Install the thirteen (13) housing bolts and torque to 37-52 N.m (27-38 lb-ft).
14.
Install a new turbine shaft seal on the turbine shaft.
15.
Install the torque converter and reinstall the transaxle as outlined in the appropriate Escort/Tracer Service Manual.
PART NUMBER
PART NAME
F4CZ-7F475-A
Idler Gear
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
961304A
Replace Idler Gear - 1.9L
4.3 Hrs.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7F475
56
OASIS CODES: 504000, 597997