Tracer L4-116 1.9L SOHC (1991)
Dashboard / Instrument Panel: Service and Repair
Instrument Panel - Finish Panel
REMOVAL
1. Disconnect the battery ground cable.
2. If equipped with a tilt column, tilt the steering wheel down.
3. If equipped with a standard column, remove the four steering column upper mounting bracket bolts.
4. Lower the steering column.
Instrument Panel
5. Remove the cap screws securing the instrument panel finish panel to the instrument panel.
6. Disconnect the electrical connectors and remove the instrument panel finish panel.
INSTALLATION
To install, reverse the removal procedure. Tighten the steering column upper mounting bracket bolts to 9-14 Nm (80-123 in lb).
