mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Powertrain Management > < Catalytic Converter|Locations|Page 2052
Page 1
background image

Exhaust Manifold: Service and Repair

    On 1994 models equipped with airbags, disable airbag system prior to performing service operation as possible airbag deployment may cause
personal injury.

1.

Disconnect battery ground cable.

2.

Remove accessory drive belt.

3.

Remove alternator and cooling fan and shroud assembly.

4.

Remove exhaust manifold heat shield.

5.

Raise and support vehicle.

6.

Disconnect catalytic converter inlet pipe.

7.

Lower vehicle.

8.

Remove exhaust manifold nuts and remove the exhaust manifold.

9.

Reverse procedure to install.

Powertrain Management > < Catalytic Converter|Locations|Page 2052