Tracer L4-116 1.9L SOHC (1991)
Accumulator HVAC: Service and Repair
Fig. 2 Spring lock coupling disconnect & connect
1.
Discharge refrigerant from system.
2.
On vehicles with 1.9L/4-114 engines, remove water reservoir.
3.
On all models disconnect electrical connector from clutch cycling pressure switch.
4.
Disconnect suction line from the accumulator/dryer. Refer to Fig. 2.
5.
On vehicles with 1.8L/4-109 engines, loosen mounting strap bolt.
6.
On vehicles with 1.9L/4-114 engines, remove two mounting bolts and mounting strap.
7.
On all models, disconnect suction accumulator/dryer inlet tube from evaporator outlet tube and remove accumulator/dryer.
8.
Reverse procedure to install. Use new O-ring lubricated with refrigerant oil.
9.
Leak test, evacuate and charge system. Check system for proper operation.