mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Main Relay (Computer/Fuel System) > < Diagram Information and Instructions|Page 3478
Page 1
background image

Fuel Pump Relay: Service and Repair

Fuel Pump Relay

REMOVAL:

1.

Disconnect the negative battery cable.

2.

Remove the trim panel on the right hand side of the floor console under the instrument panel.

3.

Disconnect the fuel pump relay electrical; connector.

4.

Remove the nut from the fuel pump relay mounting bracket and remove the relay.

INSTALLATION:

1.

Position the relay and install the bracket mounting nut.

2.

Connect the relay electrical connector.

3.

Install the trim panel on the right side of the floor console under the instrument panel.

4.

Connect the negative battery cable.

Main Relay (Computer/Fuel System) > < Diagram Information and Instructions|Page 3478