Tracer L4-116 1.9L SOHC (1991)
Small Sun Gear And One-Way Clutch Assembly
NOTE: Refer to the Small Sun Gear And One-way Clutch Assembly image when disassembling small sun gear and one-way clutch.
1. Inspect sun gear drum and small sun gear for damage or wear.
2. Using a dial indicator, check sun gear drum I.D. Maximum is 1.316 inch.
3. Using a dial indicator, check small sun gear I.D. Maximum is 0.946 inch.
4. Disassemble one-way clutch, noting the following:
a. Remove inner race, one-way clutch, and thrust bearing.
b. Inspect inner and outer race and replace as required.
c. Lubricate thrust bearing, then install to one-way clutch inner race.
Installing One-Way Clutch Inner Race Into Outer Race
d. Install one-way clutch into one-way clutch outer race.
NOTE: Ensure spring cage of one-way clutch faces outer race.
e. Install one-way clutch inner race into clutch outer race turning inner race counterclockwise.