Tracer L4-116 1.9L SOHC (1991)
Installing Piston Return Spring And Stopper
5. Install return spring stopper with step facing upwards.
6. Install snap ring half-way down the reverse forward drum.
7. Compress spring and retainer using suitable tool No. T88C-77000-AH or equivalent.
8. Install snap ring with suitable screwdriver.
9. Install dished plate with dished side facing the piston.
10. Install retaining plate with the step facing downward, then install snap ring.
11. Measure clearance of snap ring and retaining plate. Clearance should be 0.059-0.071 inch.
Reverse Clutch Pressure Plate Thickness Chart
12. If clearance is not as specified, select a retaining plate which will bring clearance to specification from the Reverse Clutch Pressure Plate
Thickness Chart.