Tracer L4-1589cc 1.6L SOHC (1989)
![background image](/mercury/tracer/l4-1589cc_1.6l_sohc/Page-287003.png)
1.
Install the control unit (timer) to the heater bracket as shown in Figure 3.
Figure 4
2.
Disconnect the front wire harness connector (C102), Figure 4.
Figure 5
3.
Connect the harness supplied in the kit between the two C102 connectors that were disconnected in Step # 2, Figure 5.
4.
Connect the white six pin connector of the kit harness to the control unit (timer), Figure 5.
5.
Disconnect the ECA center connector.