Tracer L4-1589cc 1.6L SOHC (1989)
Clutch Release Bearing: Service and Repair
1. Remove transaxle.
2. Install flywheel locking tool T84P-6375-A or equivalent.
3. Using a suitable clutch pilot tool to hold clutch plate in position, alternately and evenly loosen pressure plate attaching bolts.
4. Remove pressure plate, then remove clutch pilot tool and clutch plate.
Positioning Clutch Plate To Flywheel
5. Reverse procedure to install. Apply lubricant C1AZ-19590-B or equivalent to clutch release bearing, clutch disc and input shaft splines. Use care
not to allow lubricant to contact clutch face. Position clutch disc to flywheel. When installing pressure plate, torque pressure plate attaching bolts
alternately and evenly to 13 to 20 ft. lbs.