Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Removal
1. Remove the body side door trim panel.
2. Peel back the plastic weathershield from the body side door (24622).
3. Disconnect the body side door latch actuating rod from the body side door outside door handle.
4. Remove two body side door outside door handle nuts and the body side door outside door handle from the body side door.
Body Side Door Latch
Installation
1. Position the body side door outside door handle on the body side door and install two body side door outside door handle nuts. Tighten the two
body side door outside door handle nuts securely.
2. Connect the body side door latch actuating rod to the body side door outside door handle.
3. Attach the plastic weathershield to the body side door.
4. Install the body side door trim panel.