Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
ABS Main Relay: Testing and Inspection
1. Key OFF.
2. Disconnect the hydraulic solenoid relay located on the hydraulic actuator.
Hydraulic Solenoid Relay
3. Use a jumper to connect terminal 85 of the hydraulic solenoid relay to the battery positive terminal.
4. Measure the resistance between terminals 30 and 87a of the hydraulic solenoid relay under the conditions listed in the following chart.
5. Measure the resistance between terminals 30 and 87 of the hydraulic solenoid relay under the conditions listed in the following chart.
6. If the hydraulic solenoid relay fails any of the above checks, replace the hydraulic solenoid relay. Otherwise, return to the Pinpoint Tests.
