Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Brake Fluid Solenoid Valve Relay: Testing and Inspection
1. Key OFF.
2. Disconnect the hydraulic pump motor relay (black relay) located on the hydraulic actuator.
3. Use a jumper to connect terminal 85 of the hydraulic pump motor relay to the battery positive terminal.
Hydraulic Pump Motor Relay
4. Measure the resistance between terminals 87 and 30 of the hydraulic pump motor relay under the conditions listed in the above chart.
5. If the hydraulic pump motor relay fails any of the above checks, replace the hydraulic pump motor relay. Otherwise, return to the Pinpoint Tests.
See: Testing and Inspection