Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Brake Pedal Spring Clip
4. Remove the brake pedal spring clip.
Clevis Pin
5. Remove the clevis pin.
6. Remove the two pedal support bracket nuts.
7. Remove the four pedal support bracket-to-power brake booster nuts and one brake pedal bracket bolt from the pedal support bracket.
8. Remove the pedal support bracket and the brake pedal from the vehicle.
9. Remove the brake pedal through bolt.
10. Disengage the brake pedal return spring from the pedal support bracket.
11. Remove the brake pedal from the pedal support bracket.
INSTALLATION
1. To install, reverse the removal procedure.