Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Brake Switch (Cruise Control): Adjustments
1. Measure the distance from the brake pedal pad to the bulkhead. The brake pedal height should be 195-205mm (7.68-8.07 inches) .
2. If the brake pedal height is not within specification, loosen the brake pedal push rod locknut.
3. Turn the brake pedal push rod until the brake pedal height is within specification.
4. Tighten the brake pedal push rod locknut to 16-22 Nm (12-16 Lb.-Ft.) .
