Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Heater Control Valve: Service and Repair
Heater Valve Replace
The heater water control valve is mounted on the bulkhead behind the intake manifold.
REMOVAL
1. Drain the engine coolant.
2. Disconnect the vacuum line.
3. Remove the heater water control valve bracket nut.
4. Remove the two heater hose clamps.
5. Remove the heater water control valve.
INSTALLATION
1. To install, reverse the removal procedure.
2. Fill the engine cooling system.
