Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
![background image](/mercury/villager/v6-181_3.0l_sohc_vin_1_efi/Page-935001.png)
Radiator Drain Plug: Service and Repair
The radiator draincock is located near the bottom of the radiator inlet tank. The radiator should be removed from the vehicle to access
the radiator draincock.
REMOVAL
1. Drain the engine coolant from the vehicle.
2. Turn the radiator draincock counterclockwise until the radiator draincock is unscrewed to the end of the threads.
3. Pull the radiator draincock from the radiator inlet tank.
INSTALLATION
1. Push the radiator draincock into the radiator drain cock opening of the radiator inlet tank until it locks into place.
2. Tighten the radiator draincock by turning it clockwise until tight.
3. Fill the cooling system to the specified level.